Huot Tap and Drill index for NF sizes 6-40 #33 to 1/2"-#20 29/64

Related Cutting Tool Holders Products

• Huot metal drill index for bit sizes 1/16" to 1/2" in 1/64 increments
  
  The original metal drill index was invented by Huot Manufacturing and are still made in the USA. These handy, all-steel drill index cases are designed to hold the drill securely by the shank to help protect cutting edges.

  • Original design, all-steel case, cover and drill holder panel
  • Decimal eqivalents permanently embossed for each size bit
• Huot metal drill index for holding sizes #1 to #60 drills
  
  The original metal drill index was invented by Huot Manufacturing and are still made in the USA. These handy, all-steel drill index cases are designed to hold the drill securely by the shank to help protect cutting edges.

  • Original design, all-steel case, cover and drill holder panel
  • Decimal eqivalents permanently embossed for each size bit
• Huot Tap and Drill index for NF sizes 6-40 #33 to 1/2"-#20 29/64
  
  The original metal tap & drill index was invented by Huot Manufacturing and are still made in the USA. These handy, all-steel index cases are designed to hold the tap & drill securely by the shank to help protect cutting edges.

  • Original design, all-steel case, cover and drill holder panel
  • Decimal eqivalents permanently embossed for each size bit
• Huot fractional Drill Stand for 1/16" to 1/2" in 1/64 increments drill bits
  
  The Huot Drill Stand is a great way to keep commonly used fractional drill bits from 1/16" to 1/2" by 64ths at your fingertips. The stand can be mounted to a drill press or onto the work bench, or can sit flat on shelf readily available.

  • Drill stand sits on a work bench or shelf or can be attached to a drill press for fast access to bits
  • Drill sizes permanently embossed into steel and won't rub off
• Huot Over & Under Reamer Index
  
  The original reamer index was invented by Huot Manufacturing and are still made in the USA. These handy, all-steel reamer cases are designed to hold the tool securely by the shank to help protect delicate cutting edges.

  • Original design, all-steel case, cover and reamer holder panel
  • Decimal eqivalents permanently embossed for each size reamer
• Huot combination NC and NF taps and drill index.
  
  The original combination National Course and National Fine tap & drill index was invented by Huot Manufacturing and are still made in the USA. These handy, all-steel index cases are designed to hold the tap & drill securely by the shank to help protect cutting edges.

  • Hold both National Course and National Fine taps in one case
  • Decimal eqivalents permanently embossed for each size bit
• Huot Fractional Drill Dispenser
  
  The Original Huot Drill Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right size drill bit. Each compartment is clearly marked for drills from 1/16" to 1/2" by 64ths and the decimal equivalent is provided as well, thus saving val...

  • Holds full packages of each size drill
  • Stackable with other Huot Dispensers
• Huot 1 to 60 Drill Dispenser
  
  The Original Huot Drill Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right size drill bit. Each compartment is clearly marked for drills from 1 to 60 and the decimal equivalent is provided as well, thus saving valuable time.

  • Holds full packages of numbered (Wire Gauge) drills from #1 thru #60
  • Decimal equivalent also provided for each size bit
• Huot Letter Size Drill Dispenser
  
  The Original Huot Drill Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right size drill bit. Each compartment is clearly marked for Letter size drills from A to Z and the decimal equivalent is provided as well, thus saving valuabl...

  • Holds full packages of A to Z Letter drills
  • Stackable with other Huot original Dispensers
• Huot Silver Deming Drill Dispenser under 1 inch
  
  The Original Huot Drill Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right size drill bit. Each compartment is clearly marked for Silver Deming Drill bits from 33/64" to 63/64" by 1/64" and the decimal equivalent is provided as ...

  • Stackable with other Huot Original Series Dispensers
• Huot Endmill Dispenser
  
  The Original Huot End Mill Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right size letter reamer. Each compartment is clearly marked for End Mills.

  • Stackable with other Huot Original Series Dispensers
• Huot Tap & Drill Dispenser
  
  The Original Huot Tap & Drill Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right size tool. Each compartment is clearly marked for taps and the corresponding size drill bit.

  • Stackable
  • Matches the correct size drill bit to the tap
• Starrett 93C T-Handle Tap Wrench, 1/4" - 1/2" Tap Size
  
  Starrett No. 93 T-Handle Tap Wrenches are for holding taps, drills, reamers, and other small tools to be turned by hand. The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight.

  • Starrett no. 93 T-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat treated to withstand ordinary shop use
  • The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight
• Albrecht 70530 Precision Arbor Adapter, Morse Taper #2 X Jacobs Taper #2
  
  Drill Chuck Arbors Mount: 2JT Shank Taper: 2MT

  • Package Quantity: (1) Piece
  • Mount: 2JT
• Huot Metric Tap/Drill/Die Dispenser
  
  The Original Huot metric Tap, Drill & Die Dispenser is an economical and convenient "point of use" cabinet that will help reduce wasted time searching for the right tool Each compartment is clearly marked for metric Taps and the corresponding Drill & Die.

  • Stackable
• SHAVIV 151-29000 Blade Holder B For B Style Blades
  
  SHAVIV by Vargus is the original hand deburring tool in the market since the 1960's and is today distributed all over the world. SHAVIV is the answer to unwanted burrs on a wide variety of materials such as metal, plastics, wood and more.

  • Accepts all "B" style blades in the SHAVIV range
  • Can be used axially or perpendicular
• Sliding Lock Hand Drill Pin Vise for Micro Drill Bits
  
  Pin Vise Holds Micro Drill Bits from 0-1/16". (0-1.5mm). Jaws lock with sliding ring to hold small objects securely. Premium Quality, Made In India

  • Pin Vise Holds Micro Drill Bits from 0-1/16". (0-1.5mm).
  • Useful for jewelery making and hobby work