Holley 20-124 4-Barrel Carburetor Installation Kit

Related Exhaust System Products

• Holley 0-90670 Model 4150 Truck Avenger 670 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke Carburetor
  
  This carburetor features maximum low-end torque and horsepower output, exceptional fuel control over rough terrain, steep angle idle, and clear sight plugs for setting the initial fuel level.

  • 1-piece off-road vent tube eliminates fuel spillover during extreme maneuvers
  • Dual feed fuel inlet with adjustable vacuum secondary for fuel economy and acceleration
• Holley 20-88 Throttle Cable Bracket
  
  This bracket aids throttle cable and throttle return spring installation. It is made of chrome-plated steel and mounts off the left rear carburetor mounting ear. Mounting hardware is included with the bracket.

  • Facilitates throttle cable and throttle return spring installation
  • Mounts off the left rear carburetor mounting ear
• Flowmaster 942550 50 Delta Flow Muffler - 2.50" Center In / 2.50" Center Out - Moderate Sound
  
  This two chamber design Incorporates Flowmaster's patented delta flow technology. The delta deflectors generate Increased scavengIng for better performance and reduced Interior sound. Milder exterior tone and reduced Interior resonance over standard 40 Series.

  • Mild to moderate exterior exhaust tone
  • Reduced Interior resonance
• Flowmaster 952060 60 Delta Flow Muffler - 2.00" Center In / 2.00" Center Out - Mild Sound
  
  This two chamber design Incorporates Flowmaster's patented delta flow technology. The delta deflectors generate Increased scavengIng for better performance and reduced Interior sound. Milder exterior tone and reduced Interior resonance over standard 40 Series.

  • Mild to moderate exterior exhaust tone
  • Reduced Interior resonance
• Holley 20-91 Transmission Kickdown Hardware Kit
  
  This hardware kit is needed when installing universal carburetors with 2 mounting holes to Fords with automatic transmissions. It supports carburetors with a 30cc accelerator pump.

  • For installation of universal carburetors with 2 mounting holes to Fords with automatic transmissions
  • Supports carburetors with a 30cc accelerator pump
• Holley 0-90470 Truck Avenger 470 CFM Vacuum Secondary Electric Choke Carburetor
  
  The Holley Truck Avenger carburetor is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through extreme angles. The Truck Avenger is the perfect carburetor for 4-cylinder, V-6, Inline 6 cylinder and small displacement V8 engines.

  • Adjustable vacuum secondary to tune for fuel economy or acceleration
  • Electric choke, easy to adjust and designed to prevent accidental over-adjustment
• Magnaflow 11215 Satin Stainless Steel 2.25" Oval Muffler
  
  Magnaflow Satin Stainless Steel 2.25 inch Oval Muffler is designed to reduce the amount of noise emitted by the exhaust system and to increase engine efficiency. It is manufactured from stainless steel and comes with an oval body of 14 inches and an overall length of 20 inches.

  • Reduces backpressure and increase engine efficiency
  • Manufactured from stainless steel
• Magnaflow 12216 Satin Stainless Steel 2.5" Center Oval Muffler
  
  Magnaflow Satin Stainless Steel 2.5 inch Center Oval Muffler is designed to reduce the amount of noise emitted by the exhaust system and to increase engine efficiency. It is manufactured from stainless steel and comes with an oval body of 14 inches and an overall length of 20 inches.

  • Reduces backpressure and increase engine efficiency
  • Manufactured from stainless steel
• Pace Setter 95-9904 MONZA Dual Outlet Exhaust Tip
  
  Designed and manufactured in the USA by PaceSetter, a leading provider of quality made, affordably priced performance products since 1972. These MONZA Exhaust Tips by PaceSetter are the best-known polished and triple-process chrome plated tips around and they are the perfect ending for any exhaust s...

  • MONZA Exhaust Tips are the best known polished and chrome plated exhaust tips.
  • Dual 2-1/2" outlet x 17" overall length with resonators quiet the loudest exhaust
• Mr. Gasket 6082 Super Intake Manifold Bolt
  
  Mr. Gasket Super Intake Manifold Bolts are designed to dress up the engine. They are made from a sturdy material that ensures extreme durability. These bolts are weatherproof offering high corrosion resistance.

  • Designed to dress up the engine
  • Made from chrome plating
• Holley 0-80457S Model 4160 Street Performance 600 CFM Square Flange 4-Barrel Vacuum Secondary Electric Choke New Carburetor
  
  This carburetor is available in a variety of configurations for street, strip, and track performance. The vacuum secondary helps heavy vehicles with automatic transmission performance, street gearing, and engines built for low-end horsepower.

  • Needle and seat design eliminates need for external float level adjustment
  • Single feed fuel inlet provides constant high volume fuel delivery
• Hooker 2455HKR Competition Ceramic Header
  
  COMP HEADER 64-74CHEVL/CM

  • Tuned-length primary tubes for street performance
  • Mandrel-bent tubing for smooth exhaust flow
• Hedman 17104 Hot Tips Chrome Exhaust Tip
  
  Lustrous chrome plating.These Hedman exhaust tips' triple-process chrome plating provides years of great looks and excellent durability. Whether you want a classic straight tip for your daily driver, or crave radical monster tips for your slammed import or sport truck, Hedman has a Hot Tips model fo...
• Moroso 38400 Intake Manifold Bolts
  
  Intake Manifold Bolt Kit SBC/90 Deg V6 Chevy/SB Chrys. With Single Plane Manifold 3/8 in. -16 x 1 1/8 12 Pnt Hds Incl.Close Tolerance Wash. Grade 8 Steel Set Of 12

  • INT.MANIF.BOLT SET CHEV
• Permatex 27140 High Strength Threadlocker Red, 36 ml Bottle
  
  High strength threadblocker for heavy-duty applications. Especially well-suited for permanently locking studs and press fits.

  • Adds 3,000 PSI holding power on slip and press fit assemblies
  • Replaces set screws and snap rings
• Vibrant 1333 3.5" Round Stainless Steel Dual Tip
  
  Vibrant 3.5" Round Stainless steel Tip is designed for efficient channeling of the exhaust gases out of the vehicle. It is molded from T304 stainless steel which is highly heat and corrosion resistant. It features a single wall angle-cut, rolled edge design and is Five year limited warranty.

  • Designed for efficient channeling of the exhaust gases
  • Molded from t304 stainless steel
• HeatShield 203123 HP Color Heat Sleeve Yellow 7/16" ID x 25' Adjustable Heat Shield Sleeve
  
  Withstands 1200°F continuousRolls are 25' long Adjustable ID from 1/4" to 7/16" Improves heat protection and adds style Excellent for custom cars Add cool protection to your custom car or hot rod.

  • Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percentage of radiant heat
• HeatShield 201038 3/8" ID x 6' Long HP Thermal Sleeve
  
  3/8 x 6 Ft.

  • Continuous operating temperature of 1000 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percentage of radiant heat
• Thermo-Tec 17125 Silver 1-1/4" X 36" Thermo-Flex Wire-Hose Insulation
  
  Thermo-Flex aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation and physical containment of hoses and wiring.

  • The combination of aluminum, silica and stainless steel is combined to produce a sleeving that is flexible, lightweight and strong
  • The aluminum-silica combination can be slit for applications such as wire looms or hose covering without disconnecting the ends of the wire or hoses
• Magnaflow 14385 Polished Stainless Steel 2.25" Dual Oval Muffler
  
  Magnaflow Polished Stainless Steel 2.25 inch Dual Oval Muffler is designed to reduce the amount of noise emitted by the exhaust system and to increase engine efficiency. It is manufactured from stainless steel and comes with an oval body of 14 inches and an overall length of 20 inches.

  • Reduces backpressure and increase engine efficiency
  • Manufactured from stainless steel
• Pace Setter 82-1161 Off Road Y-Pipe
  
  This 3" diameter Off Road Y-pipe is exclusively for use with PaceSetter Quik Trip Long Tube Headers for 1993-1997 Camaro and Firebird with 5.7L LT1 engine (header part #70-2235, 72C2235, 70-2237, 72C2237, 70-2239 and 72C2239). The 16-gauge tubing is aluminized for longer life.

  • Made from 3" diameter, 16-gauge aluminized tubing
  • Mandrel bent for maximum flow
• Vibrant 4258 Standard Flex Coupling with Inner Braid Liner
  
  Vibrant Standard Flex Coupling with Inner Braid Liner is designed to isolate vibration exerted by the vehicle’s engine and reduces the stress on exhaust system. This coupling made from stainless steel prevents cracking of manifolds and downpipes.

  • Isolates vibration exerted by the vehicle?s engine
  • Reduces the stress on exhaust system
• Bosal 166-021 Muffler
  
  Bosal Exhaust 166-021 Muffler
• Bosal 283-309 Muffler
  
  REAR MUFFLER -- Direct Fit Muffler, New Muffler, Installs With Simple Hand Tools , FREE Life Time Limited Warranty Available on Part # BO283309Location: Rear

  • MB 420/560SEC/L 86/7
• Vibrant 11492 3.5"O.D. Aluminum V-Band Flange
  
  Flange: V-band Flange Assembly; for 3 1/2 inch OD Tubing

  • Flange: V-band Flange Assembly; for 3 1/2 inch OD Tubing
• HeatShield 274234 Thermaflect Sleeve 2-3/4" ID x 3' Heat Shield Sleeve
  
  Withstands up to 1100°FShields wires, lines, and cables from heat. Light weight superior insulating technology. Reflects up to 95% of radiant heat awayKeep your wiring, fuel lines, brake lines, and cables safe from heat damage. Heatshield's heat resistant hook and loop seam makes installation easy.

  • Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 90 percentage of radiant heat
• Lawson Industries FT22504B Stainless Steel Universal Flex Tube
  
  Lawson Industries stainless steel flex pipe is built with high grade 304 stainless steel. They are tested for quality, performance & durability. These couplings are designed to relieve stress on your exhaust system by isolating engine vibration.

  • Premium construction
  • 304 stainless steel
• Hushpower 12514310 DBX 2.50" Center Inlet/Outlet 6" x 14" Case 304S Stainless Steel Moderate Sound Muffler
  
  These mufflers feature a 409S stainless steel core, and a semi-polished 304S stainless steel outer shell. Fully welded by skilled fabricators for maximum quality and durability. The dBX Series mufflers deliver performance gains with a moderate sound level and are perfect for performance minded enthu...

  • Durable fully welded 304 stainless polishable case
  • 409 stainless steel internal construction
• HeatShield 315023 HP Color Exhaust Wrap Yellow 1" Wide x 50' Exhaust Wrap
  
  Heatshield Exhaust Wrap - Colored, 1" x 50', Yellow

  • Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
  • Reduces under hood temperatures up to 50 percentage
• HeatShield 372025 Lava Wrap 2" Wide x 25' Exhaust Insulating Heat Wrap
  
  Heatshield Exhaust Wrap - Lava Wrap, 2" x 25'

  • Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
  • Reduces under hood temperatures up to 50 percentage